Re: NANFA--plywood aquariums?

Steve Thomas (steve_at_nixhosting.com)
Mon, 17 Feb 2003 12:11:49 -0500

As long as you are putting it against an already framed tank. The board
itself is flexible and it will warp and bend. So using these as the walls
alone won't work. But you can surely use it against plywood or something and
seal it all up with silicone.

----- Original Message -----
From: "Denkhaus, Robert" <Robert.Denkhaus_at_fortworthgov.org>
To: <nanfa_at_aquaria.net>
Sent: Monday, February 17, 2003 12:07 PM
Subject: RE: NANFA--plywood aquariums?

> Just kidding with the 200 gallon thing... I actually was considering
making
> approximately 20 gallon tanks using FRP laminated on 3/4 inch plywood for
the
> back, sides, and bottom. When I first used FRP, it came pre-laminated on
1/2
> waferboard but in Texas it seems that you can only buy the FRP sheets
alone
> and have to laminate it yourself. I also have considered using it to
> waterproof much bigger tanks but only if it was covering the actual
framing
> material such as a total built in tank. Your thoughts are appreciated!
>
> Rob Denkhaus
> Fort Worth Nature Center & Refuge
>
> > -----Original Message-----
> > From: Steve Thomas
> > Sent: Monday, February 17, 2003 11:00 AM
> > To: nanfa_at_aquaria.net
> > Subject: Re: NANFA--plywood aquariums?
> >
> >
> > Wait lol Don't blame me for that :). Are you going to use it
> > as the walls?
> > The impression I got was that you were going to glue it to a
> > already made
> > tank just for looks. I know it is 100% water proof.
> >
> > Yes I know what you mean by it being slippery. They make
> > their chefs wear
> > sneakers in the cutting area.
> >
> > ----- Original Message -----
> > From: "Denkhaus, Robert" <Robert.Denkhaus_at_fortworthgov.org>
> > To: <nanfa_at_aquaria.net>
> > Sent: Monday, February 17, 2003 11:47 AM
> > Subject: RE: NANFA--plywood aquariums?
> >
> >
> > > Thanks for the input Steve. Now, when I build my 200
> > gallon tank in my
> > living
> > > room and it blows out, can I tell my wife that you said it
> > would work? :)
> > >
> > > I've done quite a bit or work with it in a lot of settings
> > but I never
> > thought
> > > of using it on floors. I know that when it gets a little
> > sawdust on it it
> > is
> > > slipperier than snot!
> > >
> > > Rob Denkhaus
> > > Fort Worth Nature Center & Refuge
> > >
> > > > -----Original Message-----
> > > > From: Steve Thomas
> > > > Sent: Monday, February 17, 2003 10:44 AM
> > > > To: nanfa_at_aquaria.net
> > > > Subject: Re: NANFA--plywood aquariums?
> > > >
> > > >
> > > > I know exactly what you are talking about. This stuff is
> > > > meant to be easily
> > > > wiped down. If it is 100% safe for food stores I'm
> > guessing it will be
> > > > perfectly safe for the fish. You idea is great and seeing a
> > > > tank with that
> > > > would be cool. The back of it which you would glue to the
> > > > tank in completely
> > > > smooth. So a little silicone and you're in business.
> > > >
> > > > I own a local construction business and we've worked with
> > > > this stuff many
> > > > times. It's just plastic and it is 100% safe for humans. I've
> > > > seen places
> > > > use this as their floor under the cutting tables. It
> > gives a non slip
> > > > surface and is easily cleaned.
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Denkhaus, Robert" <Robert.Denkhaus_at_fortworthgov.org>
> > > > To: <nanfa_at_aquaria.net>
> > > > Sent: Monday, February 17, 2003 11:33 AM
> > > > Subject: RE: NANFA--plywood aquariums?
> > > >
> > > >
> > > > > I've been toying with the idea of using a material known as
> > > > "glassboard"
> > > > or
> > > > > "FRP" over plywood or chipboard for aquaria. It's easier
> > > > to work with
> > > > than
> > > > > formica laminate and is just as waterproof. It is the
> > > > material used to
> > > > cover
> > > > > walls and ceilings in public restrooms. The problem, and
> > > > the benefit, is
> > > > that
> > > > > the material has a tetured surface (kind of a bubbly
> > > > texture) that may
> > > > hinder
> > > > > adhesion but also offer an interesting texture for algae
> > > > growth on the
> > > > back of
> > > > > the tank.
> > > > >
> > > > > Any thoughts or experience?
> > > > >
> > > > > Rob Denkhaus
> > > > > Fort Worth Nature Center & Refuge
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Brian Haas
> > > > > > Sent: Sunday, February 16, 2003 11:50 AM
> > > > > > To: nanfa_at_aquaria.net
> > > > > > Subject: Re: NANFA--plywood aquariums?
> > > > > >
> > > > > >
> > > > > > Both methods have been working for me for about three years
> > > > > > now with zero
> > > > > > leaks. I had some problems with a formica method tank, but
> > > > > > only because I
> > > > > > was stupid and tried the old "hey, let's be a moron and move
> > > > > > the aquarium
> > > > > > while it has 150 gallons of water and 50 lbs. of gravel in
> > > > > > it" trick. That
> > > > > > is not good for seals, in case anyone didn't already know :)
> > > > > >
> > > > > > Travis Haas
> > > > > > Hazel Green, WI
> > > > --
> > > > > /"Unless stated otherwise, comments made on this list do
> > > > not necessarily
> > > > > / reflect the beliefs or goals of the North American
> > Native Fishes
> > > > > / Association"
> > > > > / This is the discussion list of the North American
> > Native Fishes
> > > > Association
> > > > > / nanfa_at_aquaria.net. To subscribe, unsubscribe, or get
> > > > help, send the word
> > > > > / subscribe, unsubscribe, or help in the body (not subject)
> > > > of an email to
> > > > > / nanfa-request_at_aquaria.net. For a digest version, send the
> > > > command to
> > > > > / nanfa-digest-request_at_aquaria.net instead.
> > > > > / For more information about NANFA, visit our web page,
> > > > http://www.nanfa.org
> > > > ----------------
> > > > /"Unless stated otherwise, comments made on this list do not
> > > > necessarily
> > > > / reflect the beliefs or goals of the North American Native Fishes
> > > > / Association"
> > > > / This is the discussion list of the North American Native
> > > > Fishes Association
> > > > / nanfa_at_aquaria.net. To subscribe, unsubscribe, or get help,
> > > > send the word
> > > > / subscribe, unsubscribe, or help in the body (not subject)
> > > > of an email to
> > > > / nanfa-request_at_aquaria.net. For a digest version, send
> > the command to
> > > > / nanfa-digest-request_at_aquaria.net instead.
> > > > / For more information about NANFA, visit our web page,
> > > > http://www.nanfa.org
> > --
> > > /"Unless stated otherwise, comments made on this list do
> > not necessarily
> > > / reflect the beliefs or goals of the North American Native Fishes
> > > / Association"
> > > / This is the discussion list of the North American Native Fishes
> > Association
> > > / nanfa_at_aquaria.net. To subscribe, unsubscribe, or get
> > help, send the word
> > > / subscribe, unsubscribe, or help in the body (not subject)
> > of an email to
> > > / nanfa-request_at_aquaria.net. For a digest version, send the
> > command to
> > > / nanfa-digest-request_at_aquaria.net instead.
> > > / For more information about NANFA, visit our web page,
> > http://www.nanfa.org
> > ----------------
> > /"Unless stated otherwise, comments made on this list do not
> > necessarily
> > / reflect the beliefs or goals of the North American Native Fishes
> > / Association"
> > / This is the discussion list of the North American Native
> > Fishes Association
> > / nanfa_at_aquaria.net. To subscribe, unsubscribe, or get help,
> > send the word
> > / subscribe, unsubscribe, or help in the body (not subject)
> > of an email to
> > / nanfa-request_at_aquaria.net. For a digest version, send the command to
> > / nanfa-digest-request_at_aquaria.net instead.
> > / For more information about NANFA, visit our web page,
> > http://www.nanfa.org

--
> /"Unless stated otherwise, comments made on this list do not necessarily
> / reflect the beliefs or goals of the North American Native Fishes
> / Association"
> / This is the discussion list of the North American Native Fishes
Association
> / nanfa_at_aquaria.net. To subscribe, unsubscribe, or get help, send the word
> / subscribe, unsubscribe, or help in the body (not subject) of an email to
> / nanfa-request_at_aquaria.net. For a digest version, send the command to
> / nanfa-digest-request_at_aquaria.net instead.
> / For more information about NANFA, visit our web page,
http://www.nanfa.org
/-----------------------------------------------------------------------------
/"Unless stated otherwise, comments made on this list do not necessarily
/ reflect the beliefs or goals of the North American Native Fishes
/ Association"
/ This is the discussion list of the North American Native Fishes Association
/ nanfa_at_aquaria.net. To subscribe, unsubscribe, or get help, send the word
/ subscribe, unsubscribe, or help in the body (not subject) of an email to
/ nanfa-request_at_aquaria.net. For a digest version, send the command to
/ nanfa-digest-request_at_aquaria.net instead.
/ For more information about NANFA, visit our web page, http://www.nanfa.org